You’ve done it. You’re ready to handle your home’s plumbing maintenance and repair. What perfect timing! You probably have tons of questions on how to start and what to do, but fear not, this article can help you. Listed below are some tips that will help you get started with your plumbing aspirations.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.
When concerned with plumbing, you need to know what can cause noisy pipes. This is important because it can mean the difference between an annoying noise and flooding in your house. Do your research to distinguish between the different noises and hire a professional if any serious risk is posed.
To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.
Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
Each month, treat your drains by pouring one cup of baking soda down it, and then follow that with a cup of regular white vinegar. Cover it with a plug or rag, because a chemical reaction is sure to occur in your pipes. Wait for a little while and then allow boiling water to go down the drain. Doing this will help rid your pipes of disgusting soap scum and blockages.
One easy way to save on energy and water is to install efficiency-oriented shower heads. Most of your water bills comes from the water you use to shower. If you spend several extra dollars putting in energy-saving shower heads, you can potentially reduce your energy bill by $100 or more annually for every shower head used in your home.
Now you should be much more prepared when it comes to plumbing. If you thought that you were ready before, well you should now be an expert! The tips that were given should have provided you some advice that can help you get started with maintaining and fixing your own plumbing.